Step 1: Set up your Customer Touchscreen 

*Ethernet connection optional (Strongly recommended)

  1. Connect the power adapter (F) into slot (1) of the Customer Touchscreen (B).

  2. Optional: Connect the ethernet cable (D) into slot (2) of the customer touchscreen (B), with the other end of the ethernet cable (D) connected to your router or ethernet wall outlet.

    1. We recommend ethernet over Wi-Fi for a more stable connection. If you only have one ethernet connection available, it should be used for this device (B).

  3. Do not use slots 3 and 4. These ports should not be in use.

Done? Good job! Then proceed to the next step.

Step #2 – Set up your POS Register